CXP82300 Datasheet | Sony Semiconductor Solutions

Description The CXP82300 is a CMOS 8-bit single chip microputer of piggyback/evaluator bined type, which is developed for evaluating the function of the CXP82316/82320/82324. Piggyback/ evaluator type 80 pin PQFP (Ceramic) Features - Wide-range instruction system (213 instructions) to cover various types of data - 16-bit operation/multiplication and division/ Boolean bit operation instructions - Minimum instruction cycle 400ns at 10MHz operation - Applicable EPROM LCC type 27C128, LCC type 27C256 (Maximum 24K bytes are available.) - Incorporated RAM capacity 704 bytes (Including fluorescent display data area) - Peripheral functions - A/D converter 8-bit, 8-channel, successive approximation method (Conversion time of 32µs/10MHz) - Serial interface Incorporated 8-bit, 8-stage FIFO (Auto transfer for 1 to 8 bytes), 1 channel 8-bit clock sync type, 1 channel - Timer 8-bit timer 8-bit timer/counter 19-bit time base timer 16-bit capture timer/counter - Fluorescent display panel controller/driver Maximum 336 segment display possible 1 to 16-digit dynamic display Dimmer function High voltage drive output (40V) On-chip pull-down resistor (Mask option) Hardware key scan function (Maximum 16 × 8 key matrix patible) - Remote control reception circuit 8-bit pulse measurement counter with on-chip 6-stage FIFO - Interruption 14 factors, 14 vectors, multi-interruption possible - Standby mode Sleep/stop - Package 80-pin ceramic QFP Note) Mask option depends on the type of the CXP82300. Refer to the Products List for details. Structure Silicon gate CMOS IC Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits. - 1- E93848A78-PS Pin...