CXP87300 Datasheet | Sony Semiconductor Solutions

CMOS 8-bit Single Chip Microputer Description The CXP87300 is a CMOS 8-bit single chip microputer of piggyback/evaluator bined type, which is developed for evaluating the function of the CXP87352/87360. Piggyback/ evaluator type 100 pin PQFP (Ceramic) Features - A wide instruction set (213 instructions) which cover various types of data. LQFP supported QFP supported - 16-bit operation/multiplication and division/ boolean bit operation instructions - Minimum instruction cycle 333ns at 12MHz operation (3.0 to 5.5V) 250ns at 16MHz operation (4.5 to 5.5V) 122µs at 32k Hz operation - Applicable EPROM LCC type 27C256, LCC type 27C512 (Maximum 60Kbytes are available.) - Incorporated RAM capacity 2048 bytes - Peripheral functions - A/D converter 8-bit, 12-channel, successive approximation method (Conversion time of 20µs/16MHz) - Serial interface Incorporated buffer RAM (Auto transfer for 1 to 32 bytes), 1 channel Incorporated 8-bit and 8-stage FIFO (Auto transfer for 1 to 8 bytes), 1 channel - Timer 8-bit timer, 8-bit timer/counter 19-bit time base timer, 32k Hz timer/counter - High precision timing pattern generator PPG 19-pin, 32-stage programmable RTG 5 pins, 2 channels - PWM/DA gate output PWM output 12 bits, 2 channels (Repetitive frequency 62.5k Hz/16MHz) DA gate pulse output 13 bits, 4channels - Servo input control Capstan FG, drum FG/PG, CTL input - VSYNC separator - FRC capture unit Incorporated 26-bit and 8-stage FIFO - PWM output 14 bits, 1 channel - VISS/VASS circuit Pulse duty auto detection circuit - Remote control receiving circuit 8-bit pulse measurement counter with on-chip 6-stage FIFO - General purpose prescaler 7 bits (SYNC1 input frequency division, FRC capture possible.) - HSYNC counter 12-bit event counter (SYNC1 input count) - Interruption 22 factors, 15 vectors, multi-interruption possible - Standby mode SLEEP/STOP - Package 100-pin ceramic PQFP Note) Mask option depends on the type of the CXP87300. Refer to the Products List for...