CXN1010 Datasheet | Sony Semiconductor Solutions

Bluetooth R Module Description The CXN1010 is a fully integrated Class 2 radio and baseband module conforming to ver. 1.1 of the Bluetooth R specification. Features - UART, USB, PCM codec, PIO, and AIO interfaces, enabling a wide range of applications. - Small package: 10 × 14 × 1.5mm - 8M-bit on-module flash memory - Voltage regulator options: either on-module or external 1.8V regulator supported - Based on the CXD3251GL, fully patible with the Bluecore2-EXT from CSR - Support for up to 7 slaves from a single master - Channel quality driven data rate General Specifications - Product name: Bluetooth R module - Antenna connector impedance: 50Ω - External interfaces: UART, USB, PCM, PIO, AIO - Supply voltage: 2.3 to 3.6V∗ - Package dimensions: 10.0 × 14.0 × 1.5mm ∗ An external 1.75 +0.15 V power supply is required for modules without internal voltage regulator (customer option). - 0.05 Bluetooth R is a trademark owned by Bluetooth SIG, Inc. and licensed to Sony. Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits. - 1- E03Y34A53 Block Diagram VDD: 1.8V VDD: 3V [Option 2] Regulator VDD: 1.8V VDD: 3V TX ANT BPF Balun RX Flash Memory (8M-bit only) UART USB BC2-Ext PCM SPI PIO, AIO [Option 1] 32MHz 32MHz_IN Module type CXN1010-3AAL CXN1010-2BAL CXN1010-3BAL CXN1010-3CAL CXN1010-2DAL CXN1010-3DAL [Option 1] X'tal Mount Mount Mount No mount No mount No mount [Option 2] Regulator Mount No mount No mount Mount No mount No...