HCD-MC1 Datasheet | Sony Semiconductor Solutions

SERVICE MANUAL US Model E Model - This set is the tuner, deck, CD and amplifier section in MHC-MC1. Manufactured under license from Dolby Laboratories Licensing Corporation. “DOLBY” and the double-D symbol a are trademarks of Dolby Laboratories Licensing Corporation. Model Name Using Similar Mechanism HCD-F150/FR10 CD Section CD Mechanism Type Optical Pick-up Name CDM-46B1 KSS-213BA/F-NP Tape deck Model Name Using Similar Mechanism HCD-DR8AV Section Tape Transport Mechanism Type TCM-230AWR2/230PWR2 SPECIFICATIONS Amplifier section U.S.A models: AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 8 Ω loads both channels driven, from 70 - 20,000 Hz; rated 80 W per channel minimum RMS power, with no more than 0.9% toral harmonic distortion from 250 m W to read output. Continuous RMS power output 80 + 80 W(8Ω at 1k Hz, 10% THD) Tortal harmonic distortion less than 0.09%(8Ω at 1k Hz, 40W) Inputs VIDEO/MD IN (phono jack): voltage 250m V/450m V, impedance 47kΩ Outputs VIDEO/MD OUT (phono jack): voltage 250m V, impedance 1kΩ PHONES (stereo phone jacks): accepts headphones of 8Ω or more SPEAKER : accepts impedance of 8 to 16Ω REAR SPEAKER : accepts impedance of 16Ω SUPER WOOFER : Voltage 1V, impedance 1kΩ Laser output Max. 44.6µW- - This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. Frequency response 2Hz - 20k Hz (±0.5d B) Wavelength 780 - 790nm Signal-to-noise retio More than 90d B Dynamic range More than 90d B CD OPTICAL DIGITAL OUT (Square optical connector jack, rear panel) Output Level - 18d Bm Tape player section Recording system 4-track 2-channel stereo Frequency response (DOLBY NR OFF) 40 - 13,000Hz (±3d B), using Sony TYPE I cassette 40 - 14,000Hz (±3d B), using Sony TYPE II cassette Tuner section FM stereo, FM/AM superheterodyne tuner FM tuner section Tuning range Antenna Antenna terminals Intermediate frequency - 108.0MHz FM lead antenna 75Ω...