ICX227AL Datasheet | Sony Semiconductor Solutions

Diagonal 4.5mm (Type 1/4) CCD Image Sensor for CCIR B/W Video Cameras Description The ICX227AL is an interline CCD solid-state image sensor suitable for CCIR B/W video cameras. pared with the current product ICX207AL, smear charactristics are improved drastically and power consumption is reduced. High sensitivity and high saturation signal are achieved by Super HAD CCD technology. This chip Features a field period readout system and an electronic shutter with variable charge-storage time. The package is a 10mm-square 14-pin DIP (Plastic). Features - Low smear (- 105d B Typ. at F5.6) - Low power consumption (- 34% pared with ICX207AL) - High sensitivity (+2.5d B at F1.2 pared with ICX207AL) - High saturation signal - Supply voltage 12V - Horizontal register: 3.3V drive - Reset gate: 3.3V drive - No voltage adjustment (Reset gate and substrate bias are not adjusted.) - Low dark current - Excellent antiblooming characteristics - Continuous variable-speed shutter - Remended range of exit pupil distance: - 20 to - 100mm Device Structure - Interline CCD image sensor - Image size: - Number of effective pixels: - Total number of pixels: - Chip size: - Unit cell size: - Optical black: - Number of dummy bits: - Substrate material: 14 pin DIP (Plastic) Pin 1 1 14 7 Pin 8 H 30 Optical black position (Top View) Diagonal 4.5mm (Type 1/4) 500 (H) × 582 (V) approx. 290K pixels 537 (H) × 597 (V) approx. 320K pixels 4.34mm (H) × 3.69mm (V) 7.3µm (H) × 4.7µm (V) Horizontal (H) direction: Front 7 pixels, rear 30 pixels Vertical (V) direction: Front 14 pixels, rear 1 pixel Horizontal 16 Vertical 1 (even fields only) Silicon Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any...