Status Instruments SEM1620
The SEM1620 is the new generation DIN rail mounted temperature amplifier from Status Instruments. It has been designed to accept most common process and temperature sensor inputs and provide the user with a three wire voltage output signal. Designed for ease of use, our latest USB interface is fitted for quick and easy configuration.| Part No. | SEM1620 |
|---|---|
| Datasheet | SEM1620 Download |
| Manufacturer | Status Instruments |
| Description | UNIVERSAL DIN RAIL TRANSMITTER |
| Buy | Stock & Price |
UNIVERSAL DIN RAIL TRANSMITTER SEM1620 SIMPLE CONFIGURATION VIA USB PORT UNIVERSAL PT100, THERMOCOUPLE, mV, mA Input ISOLATED INPUT PUSH BUTTON USER TRIM THREE WIRE ISOLATED VOLTAGE OUTPUT INTRODUCTION Isolation is provided between input and output and all temperature ranges are linear to temperature. Just connect a standard USB cable between the SEM1620 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make. To further help save time, the SEM1620 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC. The following parameters are configurable :- INPUT TYPE LOW RANGE HIGH RANGE UNITS OUTPUT BURNOUT USER TRIM PT100 T/C K, J, E, N, T, R, S mV Input @ 4 mA Input @ 20 mA °F, °C °F, °C mV (0 to 10) V (2 to 10) V (0 to 5) V (1 to 5) V (0 to 1) V Up/Scale Down/Scale On , Off mA mA The SEM1620 is also provided with user push button trim, allowing trim adjustments at both offset and span.
