SM4007FL
SM4007FL is SURFACE MOUNT RECTIFIER DIODES manufactured by Sunmate.
Features
! Glass Passivated Die Construction ! Ideally Suited for Automatic Assembly ! Low Forward Voltage Drop ! Low Power Loss ! Built-in Strain Relief ! Plastic Case Material has UL Flammability
Classification Rating 94V-O
Mechanical Data
! Case: JEDEC SOD-123FL molded plastic body over passivated chip
! Terminals : Plated axial leads, ! solderable per MIL-STD-750, Method 2026 ! Polarity : Color band denotes cathode end ! Mounting Position : Any ! Weight:0.0007 ounce, 0.02 grams
SOD-123FL Dim Min Max Typ
A 3.50 3.80 3.65 B 2.60 2.90 2.75 C 1.70 1.90 1.80 D 0.09 1.10 1.00 E 0.08 1.10 0.095 H 0.12 0.20 0.16 L 0.07 0.09 0.08 All Dimensions in mm
Maximum Ratings and Electrical Characteristics TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Characteristic
Symbol SM4001FL SM4002FL SM4003FL SM4004FL SM4005FL SM4006FL SM4007FL Unit
Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage
RMS Reverse Voltage
VRRM
VRWM
VR(RMS)
Average Rectified Output Current @TL = 100°C
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on
IFSM rated load (JEDEC Method)
Forward Voltage
@IF = 1.0A
Peak Reverse Current At Rated DC Blocking Voltage
@TA = 25°C @TA = 125°C
Reverse Recovery Time (Note 1) trr
Typical Junction Capacitance (Note 2)
Cj
Typical Thermal Resistance (Note 3)
RJL
Operating and Storage Temperature Range
Tj, TSTG
Note: 1. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A, 2. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. 3. Mounted on P.C. Board with 8.0mm2 land...
