HV2601 Datasheet | Supertex

Features - - HVCMOS technology for high performance - - 16-channel high voltage analog switch - - 3.3V input logic level patible - - 20MHz data shift clock frequency - - Very low quiescent power dissipation (-10µA) - - Low parasitic capacitance - - DC to 50MHz small signal frequency response - - -60d B typical OFF-isolation at 5.0MHz - - CMOS logic circuitry for low power - - Excellent noise immunity - - Cascadable serial data register with latches - - Flexible operating supply voltages Applications - - Medical ultrasound imaging - - NDT metal flaw detection - - Piezoelectric transducer drivers - - Optical MEMS modules General Description The Supertex HV2601 is a low charge injection 16-channel high voltage analog switch integrated circuit (IC) intended for use in applications requiring high voltage switching controlled by low voltage control signals, such as medical ultrasound imaging and other piezoelectric transducer drivers. Input data are shifted into a 16-bit shift register that can then be retained in a 16-bit latch. To reduce any possible clock feedthrough noise, the latch enable bar should be left high until all bits are clocked in. Data are clocked in during the rising edge of the clock. Using HVCMOS technology, this device bines high voltage bilateral DMOS switches and low power CMOS logic to provide efficient control of high voltage analog signals. The device is suitable for various binations of high voltage supplies, e.g., VPP/VNN: +40V/-160V, +100V/-100V, and +160V/-40V. Block Diagram DIN CLK DOUT 16-Bit Shift Register Latches D LE CLR Level Shifters Output Switches SW0 D LE CLR SW1 D LE CLR SW2 D LE CLR D LE CLR SW14 SW15 Doc.# DSFP-HV2601 E101311 VDD GND LE CLR VNN...