HV5408B Datasheet | Supertex

Supertex inc. 32-Channel Serial to Parallel Converter With High Voltage Push-Pull Outputs Features - - Processed with HVCMOS® technology - - Low power level shifting - - SOURCE/SINK current minimum 20m A - - Shift register speed 8.0MHz - - Latched data outputs - - CMOS patible inputs - - Forward and reverse shifting options - - Diode to VPP allows efficient power recovery General Description The HV5408B is a low voltage serial to high voltage parallel converter with push-pull outputs. This device has been designed for use as a driver for AC-electroluminescent displays. It can also be used in any application requiring multiple output high voltage current sourcing and sinking capabilities, such as driving plasma panels, vacuum fluorescent, or large matrix LCD displays. The HV5408B consists of a 32-bit shift register, 32 latches, and control logic to enable outputs. Q1 is connected to the first stage of the shift register through the Output Enable logic. Data is shifted through the shift register on the low to high transition of the clock. When viewed from the top of the package, the HV5408B shifts in the counter-clockwise direction. A data output buffer is provided for cascading devices. This output reflects the current status of the last bit of the shift register (32). Operation of the shift register is not affected by the LE (latch enable) or the OE (output enable) inputs. Transfer of data from the shift register to the latch occurs when the LE input is high. The data in the latch is retained when LE is low. Typical Application Circuit DATA INPUT CLK Low Voltage Micro Processor LE OE Shift Register Latches Output Contr. High Voltage Level Translators & Push-Pull Output Buffers DATA OUT Supertex HV5408B Data Input for cascading the next HV5408B HVOUT1 HVOUT32 Columns Display...