IQ24500HZX10 Datasheet | SynQor Worldwide Headquarters

feature 2,250 Vdc isolation and low mon mode noise. The Zeta series converters offer industry leading useable output power for any standard “half-brick” module. Ro HS pliant (see last page). Operational Features - Ultra-high efficiency, 94% at full rated load current, 95% at half rated load current - Delivers up to 10 A of output current (500 W) - Wide input voltage range: 18 - 36 V, with 50 V 100 ms input voltage transient capability - Fixed frequency switching provides predictable EMI performance - No minimum load requirement means no preload resistors required - Wide output voltage trim range (-50% to +10%), see trim section IQ24500HZC10 Module .. Protection Features - Input under-voltage lockout disables converter at low input voltage conditions - Output current limit and short circuit protection protects converter and load from damage and consequent hazardous conditions - Active back bias limit provides smooth startup with external load induced pre-bias - Latching output over-voltage protection protects load from damaging voltages - Thermal shutdown protects converter from abnormal environmental conditions Mechanical Features - Industry standard half-brick pin-out configuration - Brick size: 2.39" x 2.49" (63.1 x 60.6 mm) - Total height only 0.512" (13 mm) - Total weight: 4.3 oz. (123 grams) Control Features - On/Off control referenced to input side Safety Features - 2250 V, 30 MΩ input-to-output isolation - UL 60950-1:2003, basic insulation - CAN/CSA-C22.2 No. 60950-1:2003 - EN60950-1:2001 - CE Marked - Ro HS pliant (see Page 12) Product # IQ24500HZx10 Phone 1-888-567-9596 Contents Mechanical Diagram - - - - - - - . . . . 2 IQ24500HZC10 ELECTRICAL CHARACTERISTICS - - - . 3-4 Standards pliance and Qualification Testing...