SL74HC151 Datasheet | System Logic Semiconductor

8-Input Data Selector/Multiplexer High-Performance Silicon-Gate CMOS The SL74HC151 is identical in pinout to the LS/ALS151. The device inputs are patible with standard CMOS outputs; with pullup resistors, they are patible with LS/ALSTTL outputs. The device selects one of the eight binary Data Inputs, as determined by the Address Inputs. The Strobe pin must be at a low level for the selected data to appear at the outputs. If Strobe is high, the Y output is forced to a low level and the Y output is forced to a high level. - Outputs Directly Interface to CMOS, NMOS, and TTL - Operating Voltage Range: 2.0 to 6.0 V - Low Input Current: 1.0 µA - High Noise Immunity Characteristic of CMOS Devices ORDERING INFORMATION SL74HC151N Plastic SL74HC151D SOIC TA = -55° to 125° C for all packages PIN ASSIGNMENT LOGIC DIAGRAM FUNCTION TABLE Inputs A2 X L L PIN 16 =VCC PIN 8 = GND L L H H H H A1 X L L H H L L H H A0 X L H L H L H L H Strobe H L L L L L L L L Outputs Y L D0 D1 D2 D3 D4 D5 D6 D7 Y H D0 D1 D2 D3 D4 D5 D6 D7 D0,D1...D7=the level of the respective D input X = don’t care System Logic Semiconductor MAXIMUM RATINGS - Symbol VCC VIN VOUT IIN IOUT ICC PD Tstg TL - Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Voltage (Referenced to GND) DC Input Current, per Pin DC Output Current, per Pin DC Supply Current, VCC and GND Pins Power Dissipation in Still Air, Plastic DIP+ SOIC Package+ Storage Temperature Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package) Value -0.5 to +7.0 -1.5 to VCC +1.5 -0.5 to VCC +0.5 ±20 ±25 ±50 750 500 -65 to +150 260 Unit V V V m A m A m A m W °C °C Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Remended Operating Conditions. +Derating - Plastic DIP: - 10 m W/°C from 65° to 125°C SOIC Package: : - 7 m W/°C from 65° to 125°C REMENDED OPERATING CONDITIONS Symbol VCC VIN,...