Datasheet4U Logo Datasheet4U.com

B43645 - Aluminum electrolytic capacitor

Features

  • Ultra compact.
  • High reliability.
  • High ripple current capability.
  • RoHS-compatible Construction.
  • Aluminum case, covered with PET sleeve without insulation sheet at the can bottom.
  • Snap-in solder pins to hold component in place on PC-board.
  • Minus pole marking on shrinking sleeve.
  • Minus pole not insulated from case.
  • Overload protection by pressure relief device on the base Terminals.
  • 2 snap-in terminals, nominal length 4.5 mm.
  • 3 snap-in termina.

📥 Download Datasheet

Datasheet preview – B43645

Datasheet Details

Part number B43645
Manufacturer TDK
File Size 851.63 KB
Description Aluminum electrolytic capacitor
Datasheet download datasheet B43645 Datasheet
Additional preview pages of the B43645 datasheet.
Other Datasheets by TDK

Full PDF Text Transcription

Click to expand full text
Aluminum electrolytic capacitors Snap-in capacitors Series/Type: Status: Date: B43645 In development September 2024 TDK Electronics AG 2024. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics’ prior express consent is prohibited. Snap-in capacitors Ultra compact – 105 °C Preliminary data B43645 Important note This series is not yet released for mass production and subject to change. The products delivered are engineering samples, prototypes or pre-series products, which are not intended for commercial use in series products of the purchaser. The supplier assumes no warranty or liability. Any use is at the sole risk of the purchaser.
Published: |