B44020 Datasheet | TDK Corporation

Aluminum electrolytic capacitors Capacitors with screw terminals accessories Series/Type: Date: B44020,B44030 $ECEMBER2019 © TDK Electronics AG 2019. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics' prior express consent is prohibited. Capacitors with screw terminals Capacitors with screw terminals accessories B44020, B44030 Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 16 B44020, B44030 Capacitors with screw terminals accessories Capacitors with screw terminals accessories Basic accessories One packing unit contains accessories for 16 capacitors. For terminals Thread d2 Toothed d1 mm washers Screws M5 5.3 A 5.1 DIN 6797 DIN 7985 / ISO 7045-M5 x 10-5.6-Z l = 10 mm M6 6.4 A 6.4 DIN 6797 DIN 7985 / ISO 7045-M6 x 12-5.6-Z l = 12 mm For threaded stud Maximum Ordering code torque 2.5 Nm B44020J0500B000 thread depth t ≥ 8 mm 4.0 Nm B44020J0600B000 thread depth t ≥ 9.5 mm Thread For terminal M12 M5 M12 M6 Toothed washers J 12.5 DIN 6797 J 12.5 DIN 6797 Nuts Hex nut BM 12 DIN 439 Hex nut BM 12 DIN 439 Maximum Ordering code torque 10 Nm B44020J0500B012 10 Nm B44020J0600B012 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 16 B44020, B44030 Capacitors with screw terminals accessories Additional accessories for capacitors with mounting stud on capacitor base Insulating washer made of hostalen Capacitor Thread diameter size Dimensional drawing Diameter d mm Ordering code 51.6 mm M12 64.2 mm M12 76.9 mm M12 90.0 mm M12 d1 0.5 = 51 d2 0.5 = 31 d3 ±0.3 = 21.5 d4 ±0.2 = 13 d1 0.5 = 63.5 d2 0.5 = 43.5 d3 ±0.3 = 21.5 d4 ±0.2 = 13 d1 0.5 = 76 d2 0.5 = 56 d3 ±0.3 = 21.5 d4 ±0.2 = 13 d1 0.5 = 89 d2 0.5 = 69 d3 ±0.3 = 21.5 d4 ±0.2 = 13 B44020B0006B051 B44020B0006B064 B44020B0006B076 B44020B0006B090 Only for capacitors with threaded stud and...