Datasheet4U Logo Datasheet4U.com

CRG2010 - Thick Film Chip Resistors

Download the CRG2010 datasheet PDF. This datasheet also covers the CRG0201 variant, as both devices belong to the same thick film chip resistors family and are provided as variant models within a single manufacturer datasheet.

Key Features

  • n Thick film resistors with a high power to size ratio,ideally suited to industrial and general purpose use. A range from 1 ohm to 10M and tolerances of 1% and 5%. Also including zero ohm links. n Suitable for most.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (CRG0201-TE.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
CRG20T60A03L IGBT CR Micro
CRG20T60A83L IGBT CR Micro
CRG20T60A93L IGBT CR Micro
CRG20T60AK3LD IGBT CR Micro
CRG20T65R85SDZ-G Silicon FS Trench IGBT CR Micro

Other Datasheets by TE Connectivity

Part Number Description
CRG2512 Thick Film Chip Resistors
CRG0201 Thick Film Chip Resistors
CRG0402 Thick Film Chip Resistors
CRG0603 Thick Film Chip Resistors
CRG0805 Thick Film Chip Resistors

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Key Features n Thick film resistors with a high power to size ratio,ideally suited to industrial and general purpose use. A range from 1 ohm to 10M and tolerances of 1% and 5%. Also including zero ohm links. n Suitable for most applications, including high frequency operation, owing to the short lead structure and low capacitance. n Seven Package Sizes n Terminal finish: Matte Sn n MSL Level 2 Thick Film Chip Resistors Type CRG Series Precious metal terminations are screen printed onto a ceramic base and fired. The resistive element is screen printed and fired and the passivation layer added. Each resistor is trimmed to tolerance by laser. The pre-scribed tile is broken into strips, the end plating is fired on and the strips broken into individual components.