TE Connectivity GC-485
The GC-485 Series heavy-duty, spring loaded gage heads are self-contained, ultra precision, digital I/O devices for high performance measurements in environments containing moisture, dirt, and fluid contaminants. The GC-485 eliminates the need for expensive and error-prone analog to digital conversion by internally converting the analog LVDT signals into engineering units (imperial or metric). The result is a fully calibrated and traceable measurement device, ready for installation, and 100% field interchangeable.| Part No. | GC-485 |
|---|---|
| Datasheet | GC-485 Download |
| Manufacturer |  TE Connectivity |
| Description | Digital I/O Gage Heads |
| Buy | Stock & Price |
FEATURES
● All-welded stainless steel construction● MS type connector (MIL-C-5015)
● Hardened tool steel contact tip
● High side load resistance
● Programmable filtering
● Calibration certificate supplied with each unit
● Air extend/spring retract available (consult factory)
APPLICATIONS
● Roller Gap Control● In-process Wet Grinding
● High Density Gaging
● Hand Held Gages
● X-Y Positional Feedback
● Remote Monitoring
●
APPLICATIONS
where wiring must be minimized GC-485 SERIES Digital I/O Gage Heads SPECIFICATIONS● RS-485 output
● ±0.1% of FR maximum (±0.05% typical) linearity
● 32 devices communicating over 2 wires
● MIN, MAX and TIR readings
● Velocity output
● Internal tare (zero) function
● Stroke ranges from ±0.125 to ±1 inch
● IEC IP68 rating to 1,000 PSI [70 bars] Operating on 8.5 to 30VDC supply, the GC-485 provides an addressable RS-485 loop output (MODBus RTU and ASCII protocols) running at 119kBd baud rate and capable of handling up to 32 devices communicating over two wires.
