PTFM101T1A0 Datasheet | TE Connectivity

Description The PTF-sensor family bines a group of resistance temperature detectors (RTD) using a Platinum resistor in thin film technology as sensing element. The characteristic curve of this Platinum RTD’s are plying with DIN EN 60751. The usage of Platinum as resistive material guarantees high long term stability A platinum RTD consists of a structured platinum film on a ceramics substrate, passivated by glass coating. The connection wires are protected with glass on the welding area. The connection wires are gold coated nickel wire or silver wire. Gold coated Niwire is preferred for welding applications with need of higher application temperature but can be soldered as well, whereas silver wires preferably used for solder applications with lower temperatures. Due to small outline and low mass this RTD has a low time constant; therefore it is a suitable solution for fast and precise feedback control systems. Sensors are packed as bulk goods in blister box. Features - R0: 100 1000 values available - TCR 3850ppm/K - Application temperature up to -50…600°C (Class B) - Various resistance tolerances ±0.24%, ±0.12%, ±0.06%, ±0.04% available - Size 2 x 2.3 x 1.1 mm³ (width/length/height) FC-geometry - Size 2 x 5.0 x 1.1 mm³ (width/length/height) FD-geometry - Size 2 x 4.0 x 1.1 mm³ (width/length/height) FF-geometry - Size 1.2 x 4.0 x 1.1 mm³ (width/length/height) FM-geometry - Gold coated nickel lead wire or silver lead wire Applications - Specific temperature feedback control - Medical - HVAC - White goods - Automotive - Industrial applications - Sensing element for plug-in probes PTF FAMILY Platinum Temperature Sensor Sensor properties Parameter Nominal Resistance at 0 °C Tolerance at 25°C Temperature Coefficient of Resistance Temperature Range for Au-coated Ni-wire Ag wire limited to 300°C Selfheating Coefficient in air, flow: 1 m/s Response Time Water Flow: 0.4 m/s Response Time Air Flow: 1 m/s Measuring Current R0: 100  Class B (F0.3) Measuring Current R0:...