Datasheet4U Logo Datasheet4U.com

U840B - Digital / Wipe-Wash Control

Datasheet Summary

Description

The circuits U840B (DIP8) and U840B-FP (SO8) are designed as interval wipe/ wash timer for automotive applications.

The interval pause t3 can be set in a range from 0.8 s to 22 s by an external 30 kW potentiometer.

All other time periods are determined by the basic frequency f0 of the oscillator.

Features

  • D Interval-switch A and B to GND D Wipe/ wash push button to VBatt D Output driver protected against short circuit digital debounced: t6 = 10 ms D All time periods digital determined by RC-oscillator D Turn-on time of relay t2 = 375 ms D Adjustable interval pause, t3 = 0.8 to 22 s D Dry wiping time t5 = 3.7 s D Program Pin PP determines turn-on delay t4 during wipe-wash mode PP to GND: t4 = 0.8 s PP to VS: t4 = 0 s Interval mode: t4 = 0 s D Inputs CP and INT digital debounced, t1 = 100 ms D All.

📥 Download Datasheet

Datasheet preview – U840B

Datasheet Details

Part number U840B
Manufacturer TEMIC Semiconductors
File Size 147.07 KB
Description Digital / Wipe-Wash Control
Datasheet download datasheet U840B Datasheet
Additional preview pages of the U840B datasheet.

📁 Similar Datasheet

  • U840A - TOILET TISSUE DISPENSER (ETC)
  • U84C - 84 Pin Ceramic Pin Grid Array (National Semiconductor)
Other Datasheets by TEMIC Semiconductors

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com U840B Digital / Wipe-Wash Control for Rear or Front Wiper Description The circuits U840B (DIP8) and U840B-FP (SO8) are designed as interval wipe/ wash timer for automotive applications. The interval pause t3 can be set in a range from 0.8 s to 22 s by an external 30 kW potentiometer. All other time periods are determined by the basic frequency f0 of the oscillator. The wipe/ wash (WIWA) mode has priority over the interval mode. The program Pin PP controls, whether the wiper immediatly starts to wipe, or with a delay time t4 of 0.8 s. The inputs CP and INT are digital debounced, the turn-on as well as the turn-off. The integrated relay driver is protected against short circuits and is switched to conductive condition in the case of a load-dump.
Published: |