Datasheet4U Logo Datasheet4U.com

TMI8122-Q1 - 1CH H-bridge Motor Driver

General Description

The TMI8122-Q1 is a motor driver for wide variety of end applications.

The device integrates an H-bridge, charge pump regulator, current sensing and regulation, current proportional output, and protection circuitry.

Key Features

  • AEC-Q100 result certification in progress:.
  • Temperature grade 1:.
  • 40°C to +125°C, TA.
  • N-Channel H-bridge Motor Driver:.
  • Drives One Bidirectional Brushed DC Motor,.
  • Two Unidirectional Brushed DC Motors,.
  • or Other Resistive and Inductive Loads.
  • Wide 4.5V to 37V Operating Voltage.
  • 10A Peak Current Drive.
  • Integrated Current Sensing and Regulation.
  • PH/EN and PWM Input Control Modes.
  • Cycle-by-cycle or Fixed Off-Time Curre.

📥 Download Datasheet

Datasheet Details

Part number TMI8122-Q1
Manufacturer TOLL Microelectronic
File Size 1.57 MB
Description 1CH H-bridge Motor Driver
Datasheet download datasheet TMI8122-Q1 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TMI8150B 5V 5-Channel Micro STM&DCMotor Driver TOLL
TMI3108 1.5MHz 1A Synchronous Step-DownConverter TOLL
TMI31602H 2A Synchronous Step-Down Converter TOLL
TMI3252 600kHz 18V 2A Synchronous COT Step-Down Converter TOLL
TMI3252S 600kHz 18V 2A Synchronous COT Step-Down Converter TOLL

Other Datasheets by TOLL Microelectronic

Part Number Description
TMI8037 500mA LNB-Power Supply & Control Voltage Regulator
TMI8262 Dual-Bridge Motor Controller
TMI8262Q Dual-Bridge Motor Controller
TMI8721-Q1 Automotive Single-Channel Smart Gate Driver
TMI8870 3.6-A Brushed DC Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TMI8122-Q1 1CH H-bridge Motor Driver with Integrated Current Sense and Regulation FEATURES  AEC-Q100 result certification in progress: – Temperature grade 1: – 40°C to +125°C, TA  N-Channel H-bridge Motor Driver: – Drives One Bidirectional Brushed DC Motor, – Two Unidirectional Brushed DC Motors, – or Other Resistive and Inductive Loads  Wide 4.5V to 37V Operating Voltage  10A Peak Current Drive  Integrated Current Sensing and Regulation  PH/EN and PWM Input Control Modes  Cycle-by-cycle or Fixed Off-Time Current Regulation  Supports 1.8V, 3.