TC3133 - 2.4 GHz 1W MMIC

General Description

The TC3133 is a 2 stage PHEMT MMIC power amplifier.

It is designed for use in low cost and high volume 2.4-2.5 GHz ISM band applications.

The MMIC provides a typical gain of 24 dB and saturation power of more than 31 dBm.

Key Features

P-1 dB: 31 dBm Small Signal Gain: 24 dB Power Added Efficiency: 30 % IP3: 39 dBm Bias Condition: 600 mA @ 5 V PHOTO.

📥 Download Datasheet

TC3133 2.4 ghz 1w mmic by TRANSCOM - Datasheet Preview

Datasheet Details

Part number	TC3133
Manufacturer	TRANSCOM
File Size	110.41 KB
Description	2.4 GHz 1W MMIC
Datasheet	TC3133 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
TC313	(TC311 - TC313) FLIP FLOPS	Sertech
TC3100H	SURFACE MOUNT THYRISTOR SURGE PROTECTIVE DEVICE	Lite-On Technology
TC3100H	SURFACE MOUNT THYRISTOR SURGE PROTECTIVE DEVICE	Lite-On
TC311	(TC311 - TC313) FLIP FLOPS	Sertech
TC312	FLIP FLOPS	Sertech

Other Datasheets by TRANSCOM

Part Number	Description
TC3131	2.4 GHz 1W MMIC
TC3139	2.3 - 2.5 GHz 1W MMIC
TC3141	2.4 GHz 2W MMIC
TC3339	2.9 - 3.7 GHz 1W MMIC
TC3873	5.25 - 5.875 GHz 3W prematched FETs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

TC3133 REV2_20031121 2.4 GHz 1W MMIC FEATURES • • • • • P-1 dB: 31 dBm Small Signal Gain: 24 dB Power Added Efficiency: 30 % IP3: 39 dBm Bias Condition: 600 mA @ 5 V PHOTO ENLARGEMENT Vg NA RF IN GND GND RF OUT RF OUT Vd DESCRIPTION The TC3133 is a 2 stage PHEMT MMIC power amplifier. It is designed for use in low cost and high volume 2.4-2.5 GHz ISM band applications. The MMIC provides a typical gain of 24 dB and saturation power of more than 31 dBm. Typical bias condition is 5V at 600 mA. The MMIC is packaged in a standard SO-8 power package. The copper based carrier of the package allows direct soldering of the device to the PCB for proper heat sinking. The input and output matching of the MMIC require external components.