CP1008 Overview
Key Specifications
Key Features
- Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw
- Units Mounted in free air, no heatsink. P.C.B at 0.375”(9.5mm) lead length with 0.5×0.5” (12×12mm)copper pads
- Units Mounted on a 3.0×3.0” ×0.11” thick (7.5×7.5×0.3cm) AL plate heatsink
- Measured at 1.0MHZ and applied reverse voltage of 4.0 volts. RATING AND CHARACTERISTIC CURVES CP1000 THRU CP1008 Fig. 1-NON-RECURRENT