CP304
CP304 is SINGLE-PHASE SILICON BRIDGE-P.C. MTG 2A/ HEAT-SINK MTG 3A manufactured by TRSYS.
FEATURES l l l l l Surge overload rating- 50 Amperes peak Low forward voltage drop and reverse leakage Small size, simple installation Plastic package has Underwriter Laboratory Flammability Classification 94V-O Reliable low cost construction utilizing molded plastic technique
MECHANICAL DATA Terminals: Leads solderable per MIL-STD-202, Method 208 Weight: 0.08 ounce, 2.5 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS At 25 ambient temperature unless otherwise noted; resistive or inductive load at 60Hz.
CP300 CP301 CP302 CP304 CP306 CP308 CP3010 UNITS
Max Recurrent Peak Rev Voltage Max Bridge Input Voltage RMS Max Average Rectified Output at TC=50
- See Fig.2 at TA=25
- - Peak One Cycle Surge Overload Current Max Forward Voltage Drop per element at 1.5A DC & 25 . See Fig.3 Max Rev Leakage at Rated DC Blocking Voltage per element at 25 See Fig.4 at 100 I2t Rating for fusing ( t<8.3ms)
Typical Junction capacitance per leg(Note 4)CJ
Typical Thermal Resistance per leg(Note 2) R JA (Note 3) R JL
50 35
100 70
200 140
400 280 3.0 2.0 50 1.0 10.0 1.0 15.0 21.0 12.0 8.0 -55 TO +125 -55 TO +150
600 420
800 560
1000 700
V V A A V A m A
A2Sec PF /W
Operating Temperature Range Storage Temperature Range NOTES:
1. Bolt down on heat-sink with silicon thermal pound between bridge and mounting surface for maximum heat transfer with #6 screw. 2. Unit mounted on 4.0×4.0×0.11” thick (10.5×10.5×0.3cm) AL. Plate. 3. Unit mounted on P.C.B at 0.375”(9.5mm) lead length with 0.5×0.5” (12×12mm) copper pads. 4. Measured at 1 MHz and applied reverse voltage of 4.0 Volts.
RATING AND CHARACTERISTIC CURVES CP300 THRU CP3010
Fig. 1-NON-RECURRENT SURGE RATING
Fig. 2-DERATING CURVE FOR OUTPUT RECTIFIED CURRENT
Fig. 3-TYPICAL FORWARD CHARACTERISTICS
Fig. 4- TYPICAL FORWARD CHARACTERISTICS...
