FR2K Datasheet | TRSYS

Features l l l l l l l l For surface mounted applications Low profile package Built-in strain relief Easy pick and place Fast recovery times for high efficiency Plastic package has Underwriters Laboratory SMB/DO-214AA Flammability Classification 94V-O Glass passivated junction High temperature soldering: 260 /10 seconds at terminals MECHANICAL DATA Case: JEDEC DO-214AA molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Indicated by cathode band Standard packaging: 12mm tape (EIA-481) Weight: 0.003 ounce, 0.093 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Resistive or inductive load. For capacitive load, derate current by 20%. SYMBOLS FR2A FR2B FR2D FR2G FR2J FR2K UNITS Volts Volts Volts Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, at TL=90 Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load(JEDEC method) Maximum Instantaneous Forward Voltage at 2.0A Maximum DC Reverse Current TA=25 At Rated DC Blocking Voltage TA=125 Maximum Reverse Recovery Time (Note 1) TJ=25 Typical Junction capacitance (Note 2) Maximum Thermal Resistance (Note 3) Operating and Storage Temperature Range NOTES: VRRM VRMS VDC I(AV) IFSM VF IR TRR CJ R JL TJ,TSTG 50 35 50 100 70 100 200 140 200 2.0 400 280 400 600 420 600 800 560 800 Amps Amps Volts A 250 500 n S 50.0 1.30 5.0 200 150 40 20.0 -50 to +150 /W 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A 2. Measured at 1 MHz and Applied reverse voltage of 4.0 volts 3. 8.0mm2 (.013mm thick) land areas RATING AND CHARACTERISTIC CURVES FR2A THRU FR2K Fig. 1-FORWARD CURRENT DERATING CURVE Fig. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT Fig. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS Fig. 4-TYPICAL REVERSE CHARACTERISTICS Fig. 5-TYPICALJUNCTION CHARACTERISTICS Fig. 6-REVERSE...