OP954 Datasheet | TT Electronics

PIN Silicon Photodiode OP950 Series Features : - Epoxy package - Linear response vs. irradiance - Fast switching me - Choice of wide or extra wide receiving angle - Side-looker package - Small package style ideal for space-limited applica ons OP950 OP954 OP955 Description: Each OP950, OP954 and OP955 device consists of a PIN silicon photodiode molded in an epoxy packge that allows spectral response from visible to infrared light wavelengths. The side-looking package is designed for easy PCBoard moun ng and space-limited applica ons. The OP950 has a 95° wide receiving angle that provides rela vely even recep on over a large area and is mechanically and spectrally matched to OPTEK’s Ga As and Ga Ai As series of infrared emi ng diodes. The OP954 has a 128° very wide receiving angle that provides rela vely even recep on over a large area. The OP955 has a 95° wide receiving angle with a recessed lens, which allows an acceptance half-angle of 45° when measured from the op cal axis to the half power point. Both OP954 and OP955 ponents are 100% produc on tested, using infrared light for close correla on with OPTEK’s Ga As and Ga AIAs emi ers. Please refer to ApplicaƟon BulleƟns 208 and 210 for addiƟonal design informaƟon and reliability (degradaƟon) data. Applications: - Non-contact reflec ve object sensor - Assembly line automa on - Machine automa on - Machine safety - End of travel sensor - Door sensor Part Number OP950 OP954 OP955 Ordering InformaƟon Sensor Viewing Angle 95° Photodiode 128°...