OPB806 Datasheet Text
Slotted Optical Switch OPB806
Features
:
- Non-contact switching
- Base or side mounting
- 0.125” (3.175 mm) slot width
Description: The OPB806 slotted optical switch consists of an infrared emitting diode (LED) and a NPN silicon phototransistor, mounted on opposite sides of a 0.125” (3.175 mm) wide slot.
The OPB806 has two sets of mounting tabs allowing Base or Side mounting of the device. The LED and phototransistor leads project from each side of the housing on 0.050” (1.27 mm) centers.
Phototransistor switching takes place whenever an opaque object passes through the slot.
Applications:
- Non-contact interruptive object sensing
- Assembly line automation
- Machine automation
- Equipment security
- Machine safety
LED Peak Part Number Wavelength
935 nm
Sensor Transistor
RoHS
Slot Width / Depth
0.125" / 0.375”
Aperture None
Lead Length
0.500"
13
2
Pin # 1 2 3 4
4
Description Anode Cathode Collector Emitter
General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print....