OPF472 Datasheet | TT Electronics

Features : - High speed, low capacitance - Popular ST style receptacle - Pre-tested with fiber to assure performance - ponent pre-mounted and ready to use - 35MHz operation minimum Description : The OPF472 is a low noise silicon PIN photodiode mounted in a low cost package for fiber optic applications. It offers fast response at moderate bias and is patible with LED and laser diode sources in the 800-1000 nm wavelength region. Low capacitance improves signal to noise performance in typical short haul LAN applications. The OPF472 is designed to be patible with multimode optical fibers from 50/125 to 200/300 microns. Applications: - Industrial Ethernet equipment - Copper - to-fiber media conversion - Intra-system fiber optic links - Video surveillance systems Ro HS ST is a registered trademark of AT&T. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc DIMENSIONS ARE IN: [MILLIMETERS] INCHES OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 .optekinc. | .ttelectronics. Issue D 07/2018 Page 1 Fiber Optic Detector OPF472 Electrical Specifications Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage Temperature Range Operating Temperature Range Lead Soldering Temperature(1) Continuous Power Dissipation(2) Maximum Reverse Voltage -55° C to +100° C -40° C to +85° C 260° C 200 m W 100 VDC Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX R Responsivity 0.45 0.55 ID Dark Current 0.1 5.0 - p Peak Response Wavelength 905 tr Output Rise Time CT Total...