OPF520 Datasheet | TT Electronics

Features : - Low Cost plastic cap package - Designed to self align in the bore of standard fiber optic receptacles - Press fit simplifies installation - Optimized for fiber optic applications using 50 to 200 micron fiber - 5 Mb/s Description : The OPF520 series fiber optic receiver is a high performance device packaged for data munications links. As such, it is designed to work with fiber core diameters from 50µm to 200µm and over a broad input power range. The construction contains a monolithic photo-IC prised of a photodiode, biasing network, DC amplifier and an open collector output transistor. The output circuitry makes this device patible with TTL and CMOS logic. This receiver is designed to operate from a single 5V supply. It is essential that a bypass capacitor be connected from VCC to GND in order to ensure the best possible operation. Applications: - Industrial Ethernet equipment - Copper-to-fiber media conversion - Intra-system fiber optic links - Video surveillance systems Part Ordering Information Part Number Description Plastic Cap ponent OPF522 Metal ST Receptacle Remended Test Circuit Ro HS General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200 .ttelectronics. | sensors@ttelectronics. Rev F 11/2019 Page 1 Fiber Optic Receiver OPF520 Series Mechanical Outline- OPF520 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200 .ttelectronics. | sensors@ttelectronics. Rev F 11/2019...