Datasheet4U Logo Datasheet4U.com

TS19377 - 2A Buck (Step-down) WLED Driver

General Description

TS19377 consists of step-down switching regulator with PWM control.

These devise include a reference voltage source, oscillation circuit, error amplifier, internal PMOS and etc.

TS19377 provides low-ripple power, high efficiency, and excellent transient characteristics.

Key Features

  • as low current consumption. Since this converter can accommodate an input voltage up to 23V, it is also suitable for the operation via an AC adapter. Features.
  • Input Voltage Range 3.6V~23V.
  • Output voltage: 0.25V~Vcc.
  • 2A Switch Output Current.
  • Duty ratio: 0%~100% PWM control.
  • 330kHz Switching Frequency.
  • Enable/Disable Functions.
  • Current limit and Thermal Shutdown.
  • Short Circuit Protections.
  • Built-in Internal SW P-CH MOS Block Diagram SW.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TS19377 2A Buck (Step-down) WLED Driver SOP-8 Pin Definition: 1. FB 8. GND 2. EN 7. GND 3. Comp 6. SW 4. Vcc 5. SW General Description TS19377 consists of step-down switching regulator with PWM control. These devise include a reference voltage source, oscillation circuit, error amplifier, internal PMOS and etc. TS19377 provides low-ripple power, high efficiency, and excellent transient characteristics. The PWM control circuit is able to the duty ratio linearly from 0 up to 100%. An enable function, an over current protect function and short circuit protect function are built inside, and when OCP or SCP happens, the operation frequency will be reduced. Also, an internal compensation block is built in to minimum external component count.