Datasheet4U Logo Datasheet4U.com

TS3420 - 2A 1.25MHz Synchronous Buck Converter

General Description

TS3420 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture.

The device is available in an adjustable version.

Key Features

  • High Efficiency: Up to 96% 2.8V to 5.5V Input Voltage Range Output Voltage from 0.6V to VIN Short Circuit Protection (SCP) Build in Soft-Start Function 1.25MHz Constant Frequency Operation Up to 2A Output Current No Schottky Diode Required in.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TS3404 PWM Buck Controller Taiwan Semiconductor Company
TS3405 Single Synchronous Buck PWM Controller Taiwan Semiconductor Company
TS34063 Dc to Dc Converter Controller Taiwan Semiconductor Company
TS34063AA Dc to Dc Converter Controller Taiwan Semiconductor Company
TS3410 1A / 1.5MHz Synchronous Buck Converter Taiwan Semiconductor Company

Other Datasheets by Taiwan Semiconductor

Part Number Description
TS3480 Low Quiescent Current LDO Voltage Regulator
TS31002 Tong Ringer
TS317 3-Terminal Adjustable Output Positive Voltage Regulator
TS317L 3-Terminal Adjustable Positive Voltage Regulator
TS321 Low Power Single Operational Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TS3420 2A, 1.25MHz Synchronous Buck Converter SOT-26 Pin Definition: 1. EN 2. Ground 3. Switching Output 4. Input 5. Ground 6. Feedback General Description TS3420 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. The device is available in an adjustable version. Supply current with no load is 200uA and drops to <1uA in shutdown. The 2.8V to 5.5V input voltage range makes TS3420 ideally suited for single Li-Ion, two to three AA battery-powered applications. 100% duty cycle provides low dropout operation, extending battery life in portable systems. Switching frequency is internally set at 1.25MHz, allowing the use of small surface mount inductors and capacitors.