TS79M00A Datasheet | Taiwan Semiconductor

TS79M00A Series 3-Terminal 500m A Negative Voltage Regulator TO-220 TO-252 (DPAK) Pin Definition: 1. Input 2. Ground (tab) 3. Output General Description The TS79M00A series of fixed output negative voltage regulators are intended as plements to the popular TS78M00A series device. These negative regulators are available in the same seven-voltage options as the TS7900A devices. In addition, one extra voltage option monly employed in MECL systems is also available in the negative TS79M00A Series. Available in fixed output voltage options from -5.0 to -24 volts, these regulators employ current limiting, thermal shutdown, and safe-area pensation--making them remarkably rugged under most operating conditions. With adequate heat sinking they can deliver output currents in excess of 0.5 ampere. This series is offered in 3-pin TO-220 & TO-252 package. Features - - - - - - Output Voltage Range -5 to -24V Output current up to 0.5A No external ponents required Internal thermal overload protection Internal short-circuit current limiting Output transistor safe-area pensation Standard Application Circuit - Output voltage offered in 2% tolerance Ordering Information Part No. TS79Mxx ACZ C0 TS79Mxx ACP RO A mon ground is required between the input and the output voltages. The input voltage must remain typically 2.0V above the output voltage even during the low point on the Input ripple voltage. XX = these two digits of the type number indicate voltage. - = Cin is required if regulator is located an appreciable distance from power supply filter. - - = Co is not needed for stability; however, it does improve transient response. Package TO-220 TO-252 Packing 50pcs / Tube 2.5Kpcs / 13” Reel Note: Where xx denote voltage...