TS809R Datasheet PDF - Taiwan Semiconductor Microprocessor Reset Circuit Specs

TS809R - Microprocessor Reset Circuit

This page provides the datasheet information for the TS809R, a member of the TS809 Microprocessor Reset Circuit family.

Datasheet Summary

Description

The TS809/810 series are microprocessor (µP) supervisory circuit used to monitor the power supplies in µP and digital systems.

They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5V, +3.3V, +3.0V powered circuits.

Features

Highly Accurate: ±2%.
Precision monitoring of +3V, +3.3V and +5V power supply voltage.
Fully specified over temperature.
Available in three output configurations.
Push-Pull RESET low output (TS809/TS809R).
Push-Pull (RESET) high output (TS810/TS810R).
140mS min. power-on reset pulse width.
12uA supply current.
Guaranteed reset valid to Vcc = +1V.
Power supply transient immunity.
No external components.

Datasheet Details

Part number	TS809R
Manufacturer	Taiwan Semiconductor
File Size	325.57 KB
Description	Microprocessor Reset Circuit
Datasheet	TS809R Datasheet
Additional preview pages of the TS809R datasheet.

📁 Similar Datasheet

TS80000 - High Efficiency Transmitter Controller (Semtech)

TS80002 - High-Efficiency Transmit Controller (Semtech)

TS80003 - High Efficiency Transmitter Controller (Semtech)

TS80210N - Broadband SPDT GaN RF Switch (Tagore)

TS8023N - Broadband SPDT GaN RF Switch (Tagore)

TS802C04 - SCHOTTKY BARRIER DIODE (Fuji Electric)

TS802C06 - SCHOTTKY BARRIER DIODE (Fuji Electric)

TS802C09 - SCHOTTKY BARRIER DIODE (Fuji Electric)

TS8043N - Broadband SP4T GaN RF Switch (Tagore)

TS805C04 - SCHOTTKY BARRIER DIODE (Fuji Electric)

Full PDF Text Transcription

Click to expand full text

TS809/810/809R/810R Series Microprocessor Reset Circuit SOT-23 Pin Definition: TS809/TS810 1. Ground 2. RESET(RESET) 3. Vcc TS809R/TS810R 1. RESET(RESET) 2. Ground 3. Vcc General Description The TS809/810 series are microprocessor (µP) supervisory circuit used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5V, +3.3V, +3.0V powered circuits. These circuits perform a single function: they assert a reset signal whenever the VCC supply voltage declines below a preset threshold, keeping it asserted for at least 140ms after VCC has risen above the reset threshold. Reset thresholds suitable for operation with a variety of supply voltages are available.

Published: May 6, 2016 |