Datasheet4U Logo Datasheet4U.com

TS9008 - 300mA High PSRR Low Noise CMOS LDO

General Description

The TS9008 is a low dropout, high PSRR, low noise linear regulator with very low quiescent.

It can supply 300mA output current with low dropout about 250mV.

The Device includes pass element, error amplifier, bandgap, current-limit and thermal shutdown circuitry.

Key Features

  • Input voltage range 2.8V~5.5V.
  • 250mV dropout at 300mA load.
  • 300mA output Current.
  • Low quiescent current 30µA (Typ. ).
  • Max. supply current.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TS9001 300mA CMOS Low Dropout Voltage Regulator Taiwan Semiconductor Company
TS9001 1.6V Nanopower Comparator Touchstone Semiconductor
TS9001 1.6V Nanopower Comparator Silicon Laboratories
TS9002 300mA CMOS LDO Taiwan Semiconductor Company
TS9010 150mA CMOS Low Dropout Voltage Regulator Taiwan Semiconductor Company

Other Datasheets by Taiwan Semiconductor

Part Number Description
TS9004 300mA CMOS LDO Adjustable Voltage
TS9005 600mA Low Noise CMOS LDO
TS9006 150mA Low Noise CMOS LDO
TS9007 300mA Low Noise CMOS LDO
TS9009 80mA CMOS Low Dropout Voltage Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TS9008 300mA High PSRR Low Noise CMOS LDO SOT-25 Pin Definition: 1. Input 2. Ground 3. Enable 4. Bypass 5. Output SOT-23 Pin Definition: 1. Input 2. Output 3. Ground General Description The TS9008 is a low dropout, high PSRR, low noise linear regulator with very low quiescent. It can supply 300mA output current with low dropout about 250mV. The Device includes pass element, error amplifier, bandgap, current-limit and thermal shutdown circuitry. The characteristics of low dropout voltage and less quiescent current make it good for some critical current application, for example, some battery powered devices. The typical quiescent current is approximately 30µA. In the shutdown mode, the maximum supply current is less than 1uA.