Datasheet4U Logo Datasheet4U.com

PSPL5868 Datasheet 10.7 Gb/s Driver Amplifier

Manufacturer: Tektronix

Overview: 10.7 Gb/s Driver Amplifier PSPL5868 Datasheet The Model PSPL5868 driver amplifier is intended for use as a modulator driver or as a linear amplifier. This device includes internal temperature pensation for excellent output stability over temperature, and exhibits both high output and low power dissipation. It also incorporates internal sequencing circuitry, making it insensitive to power supply application sequence. Key performance specifications 11 V output amplitude 10.7 Gb/s Modulator Driver Linear amplifier with 28 dB gain 30 kHz to 11.8 GHz bandwidth Temperature pensated design for output stability Includes bias network, crossing point control & adjustable output voltage .tektronix. 1 Datasheet Typical 10.7 Gb/s eye measurements Typical performance Input from Tektronix PPG1601, PRBS = 223–1, 750 mV Typical small signal S21 (measured at –20 dBm input power) Output amplitude, 11 V Typical small signal S11 and 22 (measured at –20 dBm input power) 2 .tektronix. Typical performance plots PSPL5868 10.7 Gb/s Driver Amplifier Output voltage vs.

Datasheet Details

Part number PSPL5868
Manufacturer Tektronix
File Size 1.91 MB
Description 10.7 Gb/s Driver Amplifier
Datasheet PSPL5868-Tektronix.pdf

General Description

s Pin # Pin Lable Description IN SMA, signal input, Vamp≤ 1.5 V (damage threshold) 1 +V Positive DC voltage supply, 8.25 V 1 2 2 GC VgcVariable output control, -15 V ≤ Vgc ≤ 0 V 3 3 -V Negative DC voltage supply, -5.25 V ≤ V ≤ -4.75 V 2 4 CP Crossing point adjust, -5 V ≤ Vcp ≤ 5 V 4 5 VB DC Voltage bias, -17 ≤ VB ≤ +33 5 6 NC No connection / Not used 7 GND Ground connection OUT SMA, signal output Crossing point vs.

Vcp Instructions The PSPL5868 10.7 Gb/s modulator driver can be operated using only three of the available 7 pins.

The DC pins required for operation are 1, 3, and 7.

PSPL5868 Distributor