79M12 - 1 Ampere Surface Mount Negative Three Terminal Voltage Regulators

Thinki Semiconductor

Download the 79M12 datasheet PDF. This datasheet also covers the 79M05 variant, as both devices belong to the same 1 ampere surface mount negative three terminal voltage regulators family and are provided as variant models within a single manufacturer datasheet.

Key Features

Output Voltage: -5 & -12V.
Output current up to 1A.
No external components required.
Internal thermal overload protection.
Internal short-circuit current limiting.
Output transistor safe-area compensation.
Output voltage offered in 4% tolerance DPAK/TO-252 Standard.

📥 Download Datasheet

79M12 1 ampere surface mount negative three terminal voltage regulators by Thinki Semiconductor - Datasheet Preview — Note: The manufacturer provides a single datasheet file (79M05-ThinkiSemiconductor.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number	79M12
Manufacturer	Thinki Semiconductor
File Size	329.96 KB
Description	1 Ampere Surface Mount Negative Three Terminal Voltage Regulators
Datasheet	79M12 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
79M12A	IP79M12A	Seme LAB

Other Datasheets by Thinki Semiconductor

Part Number	Description
79M05	1 Ampere Surface Mount Negative Three Terminal Voltage Regulators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

79M05/79M12 ® 79M05/79M12 Pb Free Plating Product Pb 1 Ampere Surface Mount Negative Three Terminal Voltage Regulators Features ● Output Voltage: -5 & -12V ● Output current up to 1A ● No external components required ● Internal thermal overload protection ● Internal short-circuit current limiting ● Output transistor safe-area compensation ● Output voltage offered in 4% tolerance DPAK/TO-252 Standard Application Circuit 79M05/79M12 A common ground is required between the input and the output voltages. The input voltage must remain typically 2.0V above the output voltage even during the low point on the Input ripple voltage. XX = these two digits of the type number indicate voltage. * = Cin is required if regulator is located an appreciable distance from power supply filter.