Datasheet4U Logo Datasheet4U.com

LM79XX - 3-Terminal 1 A Negative Voltage Regulator

Key Features

  • Output Voltage: -5 & -12V Output current up to 1A No external components required Internal thermal overload protection Internal short-circuit current limiting Output transistor safe-area compensation Output voltage offered in 4% tolerance TO-220M-1 Unit : (mm) Standard.

📥 Download Datasheet

Datasheet Details

Part number LM79XX
Manufacturer Thinki Semiconductor
File Size 377.10 KB
Description 3-Terminal 1 A Negative Voltage Regulator
Datasheet download datasheet LM79XX Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM79XX LM79XX Series 3-Terminal Negative Regulators National Semiconductor
LM79 Microprocessor System Hardware Monitor National Semiconductor
LM7900 3- TERMINAL NEGATIVE OUTPUT VOLTAGE REGULATORS ETC
LM7900 1.5 AMP NEGATIVE VOLTAGE REGULATOR Seme LAB
LM7905 LM79XX Series 3-Terminal Negative Regulators National Semiconductor

Other Datasheets by Thinki Semiconductor

Part Number Description
LM7905 3-Terminal 1 A Negative Voltage Regulator
LM7912 (LM79XX) 3-Terminal 1 A Negative Voltage Regulator
LM7805 3-Terminal 1A Positive Voltage Regulator
LM7808 3-Terminal 1A Positive Voltage Regulator
LM7810 3-Terminal 1A Positive Voltage Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM79XX ® Pb Free Plating Product LM79XX 3-Terminal 1 A Negative Voltage Regulator Pb Features ● ● ● ● ● ● ● Output Voltage: -5 & -12V Output current up to 1A No external components required Internal thermal overload protection Internal short-circuit current limiting Output transistor safe-area compensation Output voltage offered in 4% tolerance TO-220M-1 Unit : (mm) Standard Application Circuit LM79XX A common ground is required between the input and the output voltages. The input voltage must remain typically 2.0V above the output voltage even during the low point on the Input ripple voltage. XX = these two digits of the type number indicate voltage. * = Cin is required if regulator is located an appreciable distance from power supply filter.