Datasheet4U Logo Datasheet4U.com

XC2173 - Crystal Oscillator

Description

The XC2173 series are high frequency, low power consumption CMOS ICs with built-in crystal oscillator, divider and clock multiplier PLL circuits.

Output is selectable from any one of the following values for f0: f0 x 5, f0 x 6, f0 x 7, f0 x 8, f0/2, f0/4, f0/8.

Features

  • Oscillation Frequency : 10MHz ~ 25MHz Divider Ratio : f0/2, f0/4, f0/8 Multiplier : f0 x 5, f0 x 6, f0 x 7, f0 x 8 Output : 3-State Operating Voltage Range : 3.3V ±10% and 5.0V ±10% Small Consumption Current: Stand-by function included.
  • Oscillation continues in stand-by CMOS Output Frequency : 80MHz ~ 160MHz (5.0V) : 50MHz ~ 125MHz (3.3V) Divider Circuit & PLL Circuit Built-In Oscillation Capacitor & Oscillation Feedback Resistor Built-In Package : SOT-26 Environme.

📥 Download Datasheet

📁 Similar Datasheet

  • XC2000 - Logic Cell Array Families (Xilinx)
  • XC2005 - Position Controller (ETC)
  • XC2018 - Logic Cell Array (Xilinx)
  • XC2023 - Bidirectional relay driver (Xiaocheng)
  • XC2064 - Designing FPGAs (Xilinx)
  • XC2064 - Logic Cell Array (Xilinx)
  • XC2200 - 16/32-Bit Single-Chip Microcontroller (Infineon)
  • XC2210U - 16/32-Bit Single-Chip Microcontroller (Infineon)
  • XC2220U - 16/32-Bit Single-Chip Microcontroller (Infineon)
  • XC2230L - 16/32-Bit Single-Chip Microcontroller (Infineon)
Other Datasheets by Torex Semiconductor
  • XC2141 - ICs for use with Crystal Oscillators
  • XC2151 - CMOS IC
  • XC2151 - ICS FOR USE WITH CRYSTAL OSCILLATORS
  • XC2151A51 - ICS FOR USE WITH CRYSTAL OSCILLATORS
  • XC2151A52 - ICS FOR USE WITH CRYSTAL OSCILLATORS
  • XC2151A54 - ICS FOR USE WITH CRYSTAL OSCILLATORS
  • XC2151A55 - ICS FOR USE WITH CRYSTAL OSCILLATORS
  • XC2151A58 - ICS FOR USE WITH CRYSTAL OSCILLATORS

Full PDF Text Transcription

Click to expand full text
XC2173 series is Discontinued. XC2173 Series ICs for use with Crystal Oscillators (PLL built - in) ETR1504_001b ■GENERAL DESCRIPTION The XC2173 series are high frequency, low power consumption CMOS ICs with built-in crystal oscillator, divider and clock multiplier PLL circuits. Output is selectable from any one of the following values for f0: f0 x 5, f0 x 6, f0 x 7, f0 x 8, f0/2, f0/4, f0/8. With an oscillation capacitor & oscillation feedback resistor built-in, a stable oscillator circuit can be put together using only an external crystal oscillator. By connecting an external standard clock, the above mentioned output frequencies can be achieved.
Published: |