Datasheet4U Logo Datasheet4U.com

XC3101 - Ultra Small Analog Output Temperature Sensor

General Description

The XC3101 series is a temperature sensor IC which

Key Features

  • ultra small, low current consumption, and high-accurate detection. It can provide both analog and alarm outputs. The alarm output configures N-channel open-drain. The device consists of a band-gap type temperature sensor, a voltage reference, a temperature setting tilt amplifier, a comparator, and various set resistors. Alarm temperature is internally set at 70 . When the temperature exceeds a set point, the alarm output is maintained as "Low". When the temperature drops a pre-set hysteresis wid.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XC3100 Field Programmable Gate Arrays Xilinx
XC3100A Field Programmable Gate Arrays (XC3000A/L/ XC3100A/L) Xilinx
XC3100L Field Programmable Gate Arrays (XC3000A/L/ XC3100A/L) Xilinx
XC3120A Field Programmable Gate Arrays Xilinx
XC3130A Field Programmable Gate Arrays Xilinx

Other Datasheets by Torex Semiconductor

Part Number Description
XC31B CMOS Temperature Sensor
XC31BPN20A CMOS Temperature Sensor
XC31BPN40A CMOS Temperature Sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
XC3101 Series Ultra Small Analog Output Temperature Sensor with Alarm Output Pin ETR0902-004 GENERAL DESCRIPTION The XC3101 series is a temperature sensor IC which features ultra small, low current consumption, and high-accurate detection. It can provide both analog and alarm outputs. The alarm output configures N-channel open-drain. The device consists of a band-gap type temperature sensor, a voltage reference, a temperature setting tilt amplifier, a comparator, and various set resistors. Alarm temperature is internally set at 70 . When the temperature exceeds a set point, the alarm output is maintained as "Low". When the temperature drops a pre-set hysteresis width from the set point, the alarm output is released to "High". The hysteresis width is 5 .