TOREX SEMICONDUCTOR XC9217
the XC9217 series can be manually switched between the PWM control mode and the automatic PWM/PFM switching control mode, allowing fast response, low ripple and high efficiency over the full range of load (from light load to high output current conditions). The soft start and current control functions are internally optimized. With the built-in U.V.L.O.- Min Voltage : 2V
- Max Voltage : 6V
- Max Operating Temp : 85°C
- Min Operating Temp : -40°C
Source:
Octopart
APPLICATIONS
! High Efficiency 92% " Mobile phones (PDC, GSM, CDMA, IMT2000 etc.) ! Low Ripple Rejection 10mV " Bluetooth equipment ! Output Current 500mA " PDA, Portable communication modem (VIN=3.0V, VOUT=1.8V)* " Portable game ! Oscillation Frequency 600kHz, 1.2MHz " Camera, Digital camera ! PWM fixed control (XC9215 series) " Cordless phone ! PWM / PFM automatic switching control (XC9216 series) " Note book computer ! Manual selection of switching control (XC9217 series) ! Maximum Duty Ratio 100% ! Ceramic Capacitor Compatible ! Ultra Small Packages SOT-25, USP-6B !GENERAL DESCRIPTION
The XC9215/9216/9217 series is a group of synchronous-rectification type DC/DC converters with a built-in 0.6 Ω P-channel driver transistor and 0.7Ω N-channel switching transistor, designed to allow the use of ceramic capacitors. The ICs enable a high efficiency, stable power supply with an output current of 500 mA to be configured using only a coil and two capacitors connected externally. Minimum operating voltage is 2.0 V.