Datasheet4U Logo Datasheet4U.com

XC9516 - Triple Output Power Supply

General Description

The XC9516 series can offer three different power supplies to TFT-LCD panels.

DC/DC converter for a source driver, positive and negative charge pumps for a gate driver.

Key Features

  • A Step-up DC/DC Converter and 2 of Charge Pumps (Positive/Negative) Input Voltage Range ： 2.5V ～ 5.5V Maximum Output Voltage ： 19V (DC/DC output) Output Voltage Accuracy ： ±1.5％ Oscillation Frequency ： 300kHz ～ 1.2MHz (Adjustable) External MOSFET Gate Signal Output ： N-Channel Open Drain Switch Over-Current Protection ： 1.3A Soft-Start Time ： Internally fixed Protection ： Over Voltage Protection (Step-up DC/DC 21V) Short-Circuit Protection (Step-up DC/DC) Short-Circuit Protection.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XC9510 Synchronous Step-Down DC/DC Converter Torex Semiconductor
XC95108 XC95108 In-System Programmable CPLD Xilinx
XC9511 Synchronous Step-Down DC/DC Converter Torex Semiconductor
XC95144 XC95144 In-System Programmable CPLD Xilinx
XC95144XL High Performance CPLD Xilinx

Other Datasheets by Torex Semiconductor

Part Number Description
XC9515 2-channel Synchronous Step-Down DC/DC Converter
XC9519 Dual Output Step-Up/Inverting DC/DC Converter
XC9120 Step-Up DC/DC Controller
XC9121 Step-Up DC/DC Controller
XC9122 Step-Up DC/DC Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
XC9516 Series Triple Output Power Supply for TFT-LCD ETR0707-009 ■GENERAL DESCRIPTION ☆GreenOperation Compatible The XC9516 series can offer three different power supplies to TFT-LCD panels. These power supplies consist of a step-up DC/DC converter for a source driver, positive and negative charge pumps for a gate driver. This IC has power-on sequences to keep inrush current as small when output voltage rises. The step-up DC/DC output can be used as power-on sequences with adding a P-channel FET as external component. Also, the FET can shut down a path to the power input line when CE pin is low. ■APPLICATIONS ●TFT-LCD panels ●LCD monitors ■FEATURES A Step-up DC/DC Converter and 2 of Charge Pumps (Positive/Negative) Input Voltage Range ： 2.5V ～ 5.