TA58L09F Datasheet | Toshiba

Features - Maximum output current - Output voltage - Output voltage accuracy - Low-dropout voltage - Protection function - Package type HSOP3-P-2.30D : 250 m A : 5/ 6/ 8/ 9/ 10/ 12/ 15 V Weight : 0.36 g (typ.) : VOUT ± 3% (@Tj = 25°C) : 0.4 V (max) (@IOUT = 200 m A) : Overcurrent protection / overheating protection / Reverse connection of power supply / 60 V load dump : Surface-mount New PW-Mold Pin Assignment Mark 132 IN GND OUT 2009-09-30 Marking 3 TA58L05, 06, 08, 09, 10, 12, 15F 58L- - F Part No. (or abbreviation code) Lot No. Note 1 Note 1: A line under a Lot No. identifies the indication of product Labels. Not underlined: [[Pb]]/INCLUDES > MCV Underlined: [[G]]/Ro HS PATIBLE or [[G]]/Ro HS [[Pb]] Please contact your TOSHIBA sales representative for details as to environmental matters such as the Ro HS patibility of Product. The Ro HS is the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Note 2: The “- - ” in each product name is replaced with the output voltage of each product. The product(s) in this document (“Product”) contain functions intended to protect the Product from temporary small overloads such as minor short-term overcurrent, overvoltage, or overheating. The protective functions do not necessarily protect Product under all circumstances. When incorporating Product into your system, please design the system (1) to avoid such overloads upon the Product, and (2) to shut down or otherwise relieve the Product of such overload conditions immediately upon occurrence. For details, please refer to the notes appearing below in this document and other documents referenced in this document. Pin Description Pin No. 1 3 2 Symbol IN GND OUT Description Input terminal. Connected by capacitor (CIN) to GND. Ground terminal Output terminal. Connected by capacitor (COUT) to GND. How to Order Product...