Datasheet4U Logo Datasheet4U.com

TA6009FNG - SHOCK SENSOR

Download the TA6009FNG datasheet PDF. This datasheet also covers the TA6009FN variant, as both devices belong to the same shock sensor family and are provided as variant models within a single manufacturer datasheet.

Key Features

  • TA6009FN/FNG operates from 2.7 to 5.5 V DC single power supply voltage. Signal from the shock sensor is amplified according to setting gain, and is detected through the internal window comparator. TA6009FN/FNG incorporates 1-ch shock detecting circuitry. Input terminal of sensor signal is designed high impedance. Differential input impedance = 100 MΩ (typ. ).
  • LPF (low pass filter) circuitry is incorporated. Cut-off frequency of LPF = 7 kHz Sensitiv.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (TA6009FN_ToshibaSemiconductor.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
TA605 Power Chip Resistor ETC
TA613A Indoor Tap/Splitter Dibo
TA616A Indoor Tap/Splitter Dibo
TA619A Indoor Tap and Splitter Dibo
TA6215xxxx TCXO Oscillator Caliber Electronics

Other Datasheets by Toshiba

Part Number Description
TA6009FN SHOCK SENSOR
TA6009FM Shock Sensor
TA6038FN SHOCK SENSOR
TA6039FN Shock Sensor
TA6042FNG Shock sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com TA6009FN/FNG TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA6009FN,TA6009FNG Shock Sensor IC (1 ch version) TA6009FN/FNG detects an existence of external shock through the shock sensor and output. Features • • TA6009FN/FNG operates from 2.7 to 5.5 V DC single power supply voltage. Signal from the shock sensor is amplified according to setting gain, and is detected through the internal window comparator. TA6009FN/FNG incorporates 1-ch shock detecting circuitry. Input terminal of sensor signal is designed high impedance. Differential input impedance = 100 MΩ (typ.) • • • LPF (low pass filter) circuitry is incorporated. Cut-off frequency of LPF = 7 kHz Sensitivity of shock detection can be adjusted by external devices. Small package SSOP10-P-0.65A (0.