Datasheet4U Logo Datasheet4U.com

TA7774P - Stepping Motor Driver IC

This page provides the datasheet information for the TA7774P, a member of the TA7774F Stepping Motor Driver IC family.

Description

Pin No.

Features

  • z One-chip two-phase bipolar stepping motor driver z Power saving operation is available. z Standby operation is available. Current consumption ≤ 115 μA z Built-in punch-through current restriction circuit for system reliability and noise suppression z TTL-compatible inputs INA, INB, and PS pins z High driving ability TA7774P/PG/F/FG : IO(START) 350 mA (MAX): VS1 ENABLE : IO(HOLD) 100 mA (MAX): VS2 ENABLE TA7774FAG : IO(START) 100 mA (MAX): VS1 ENABLE : IO(HOLD) 50 mA (MAX): VS2 ENABLE z Typical.

📥 Download Datasheet

Datasheet preview – TA7774P

📁 Similar Datasheet

  • TA7705F - Low Noise Dual Amplifier (Toshiba)
  • TA7705P - (TA7405P / TA7705P) Pre Amp (ETC)
  • TA7705P - Low Noise Dual Amplifier (Toshiba)
  • TA7709F - Dual Preamplifiers (Toshiba)
  • TA7709P - Dual Preamplifiers (Toshiba)
  • TA7727P - Audio Dual Preamplifier (Toshiba)
  • TA7733F - FUNCTIONAL BRIDGE DRIVER (Toshiba)
  • TA7733FG - FUNCTIONAL BRIDGE DRIVER (Toshiba)
  • TA7736 - DC MOTOR DRIVER IC (Toshiba)
  • TA7736F - DC MOTOR DRIVER IC (Toshiba)
Other Datasheets by Toshiba Semiconductor
  • TA7774PG - Stepping Motor Driver
  • TA7774F - Stepping Motor Driver IC
  • TA7774FAG - Stepping Motor Driver
  • TA7774FG - Stepping Motor Driver
  • TA7712F - 3 PHASE BI-DIRECTIONAL FOR MOTOR CONTROL IC
  • TA7712FG - Full-Wave Brushless DC Motor Controller IC
  • TA7712P - 3 PHASE BI-DIRECTIONAL FOR MOTOR CONTROL IC
  • TA7712PG - Full-Wave Brushless DC Motor Controller IC

Full PDF Text Transcription

Click to expand full text
TA7774P/PG/F/FG TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA7774P/PG, TA7774F/FG, TA7774FAG Stepping Motor Driver IC The TA7774P/PG and TA7774F/FG/FAG are two-phase bipolar stepping motor driver ICs designed especially for 3.5- or 5.25-inch FDD head actuator drives. The ICs have a dual-bridge driver supporting the bipolar driving of induced loads, a power-saving circuit, and a standby circuit. They are ideal for achieving reduced set size and lower power consumption. Features z One-chip two-phase bipolar stepping motor driver z Power saving operation is available. z Standby operation is available.
Published: |