TB2906HQ
Overview
- : High power output POUT MAX (1) = 43 W (typ.) P (VCC = 14.4 V, f = 1 kHz, JEITA max, RL = 4 Ω) : POUT MAX (2) = 39 W (typ.) (VCC = 13.7 V, f = 1 kHz, JEITA max, RL = 4 Ω) : POUT (1) = 26 W (typ.) (VCC = 14.4 V, f = 1 kHz, THD = 10%, RL = 4 Ω) : POUT (2) = 23 W (typ.) (VCC = 13.2 V, f = 1 kHz, THD = 10%, RL = 4 Ω)
- Low distortion ratio: THD = 0.015% (typ.) (VCC = 13.2 V, f = 1 kHz, POUT = 5 W, RL = 4 Ω) * * * * *
- Low noise: VNO = 180 µVrms (typ.) (VCC = 13.2 V, Rg = 0 Ω, BW = 20 Hz to 20 kHz, RL = 4 Ω) Built-in standby switch function (pin 4) Built-in muting function (pin 22) Built-in Off-set detection function (pin 25) Weight: 7.7 g (typ.) DataSh ee Built-in various protection circuits: Thermal shut down, overvoltage, out to GND, out to VCC, out to out short Operating supply voltage: VCC (opr) = 9 to 18 V (RL = 4 Ω) Note 1: Since this device’s pins have a low withstanding voltage, please handle it with care. Note 2: Install the product correctly. Otherwise, it may result in break down, damage and/or degradation to the product or equipment. Note 3: These protection functions are intended to avoid some output short circuits or other abnormal conditions temporarily. These protect functions do not warrant to prevent the IC from being damaged. In case of the product would be operated with exceeded guaranteed operating ranges, these protection features may not operate an
