Datasheet4U Logo Datasheet4U.com

TB62709FG - 7-SEGMENT DRIVERS

General Description

OF OPERATION Data input (SERIAL IN, CLOCK, LOAD) The data are input serially using the SERIAL

IN pin.

IN, LOAD, and CLOCK.

bit shift register offers control modes includ

Key Features

  • Control circuit power supply voltage : VDD = 4.5 to 5.5 V Digit output rating : 17 V /.
  • 400 mA Decoder output rating : 17 V / 50 mA Built.
  • in decoder : Decodes the numerals 0 to 9, certain alphabetic characters, and of course blanks code. Digit control function : Can scan digit outputs DIG.
  • 0 to DIG.
  • 3 when connected to the common anode pins of a 7.
  • segment display. Maximum transmission frequency : fCLK = 15 MHz Decoder outputs (OUT.
  • A to OUT.
  • Dp.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TB62709F 7-SEGMENT DRIVERS Toshiba
TB62709 7-SEGMENT DRIVERS WITH BUILT-IN DECODERS Toshiba
TB62709N 7-SEGMENT DRIVERS Toshiba
TB62701AN 16BIT SHIFT REGISTER / LATCH & CONSTANT CURRENT DRIVERS Toshiba
TB62701N 16BIT SHIFT REGISTER / LATCH & CONSTANT CURRENT DRIVERS Toshiba

Other Datasheets by Toshiba

Part Number Description
TB62709NG 7-SEGMENT DRIVERS
TB62201AFG Dual-Stepping Motor Driver IC
TB62202AFG Dual-Stepping Motor Driver IC
TB62206FG BiCD PWM 2-Phase Bipolar Stepping Motor Driver
TB62209FG Stepping Motor Driver IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TB62709NG/FG TOSHIBA Bi−CMOS INTEGRATED CIRCUIT SILICON MONOLITHIC TB62709NG,TB62709FG 7−SEGMENT DRIVERS WITH BUILT−IN DECODERS (COMMON ANODE CAPABILITY, MAXIMUM 4−DIGIT CONTROL) The TB62709NG and TB62709FG are multifunctional, compact, 7−segment LED display drivers. These ICs can directly drive 7−segment displays and individual LEDs, and can control either a 4−digit display with decimal points, or 32 individual LEDs. These ICs can also be used with common−anode displays. Their outputs are constant current, the ampere levels at which are set using an external resistor. A synchronous serial port connects the IC to the CPU.