The following content is an automatically extracted verbatim text
from the original manufacturer datasheet and is provided for reference purposes only.
View original datasheet text
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TCS10SPU
Digital-Output Magnetic Sensor
TCS10SPU
Feature
Push-Pull Output South-pole Detection
Marking
PA1
UFV Weight: 0.007 g (typ.)
Pin Assignment (Top View)
VCC (Note1) GND2 (Note2)
54
1
VOUT
23
GND1 NC
(Note2)
Function Table
Magnetic Flux Density
≥ BON
≤ BOFF
Output
L H
Note 1: It is recommended to add a capacitor of about 0.1 μF between VCC and GND. Note 2: The GND1 and GND2 pins should be tied to ground.
The GND2 pin is used as a test pin during production.
TCS10SPU Datasheet
