TLGE125 Datasheet | Toshiba

TENTATIVE TOSHIBA LED Lamp In Ga AℓP Green Light Emission Panel Circuit Indicator Unit in mm - - - - - - - - - 3mm diameter (T1) In Ga AℓP green LED All plastic mold type. Colorless clear lens Low drive current, high intensity green light emission Remended forward current: IF = 15~20m A (DC) All plastic molded lens, provides an excellent on- off contrast ratio. Fast response time, capable of pulse operation. High power luminous intensity Applications: Suitable for outdoor message signboard, safety equipment, etc. .. Maximum Ratings (Ta = 25°C) Characteristic Forward current (DC) Reverse voltage Power dissipation Operating temperature range Storage temperature range Symbol IF VR PD Topr Tstg Rating 50 4 140 -30~85 -40~120 Unit m A V m W °C °C JEDEC EIAJ TOSHIBA Weight: 0.14g ― ― 4- 4E1A 2002-09-25 Electrical And Optical Characteristics (Ta = 25°C) Characteristic Forward voltage Reverse current Luminous intensity Peak emission wavelength Spectral line half width Dominant wavelength Symbol VF IR IV λp ∆λ λd IF=20m A VR=4V IF=20m A IF=20m A IF=20m A IF=20m A (Note) Test Condition Min ― ― 153 ― ― ― Typ. 2.27 ― 500 574 11 571 Max 2.8 50 ― ― ― ― Unit V µA mcd nm nm nm (Note): Lamps are classified into the following ranks according to their luminous intensity. Measurement tolerance for each limit is ±15%. .. P: 180-360mcd, Q: 320-640mcd, R: 560-1120mcd Precaution - - - Please be careful of the followings Soldering temperature: 260°C max Soldering time: 3 s max (Soldering portion of lead: Up to 2mm from the body of the device) If the lead is formed, the lead should be formed up to 5mm from the body of the device without forming stress to the resin. Soldering should be performed after lead forming. This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp, please ensure that it will not be affected by this IR light. 2002-09-25 - VF 100 Ta = 25°C 10000 Ta =...