TLP115A Datasheet | Toshiba

TOSHIBA Photocoupler IRED & Photo-IC High Speed, Long Distance Isolated Line Receiver Microprocessor System Interfaces Digital Isolation For A / D, D / A Conversion puter- Peripheral Interfaces Ground Loop Elimination Unit : mm The TOSHIBA mini flat coupler TLP115A is a small outline coupler, suitable for surface mount assembly. TLP115A consists of a high output power infrared emitting diode, optically coupled to an integrated high gain, high speed shielded photo detector whose output is an open collector schottky clamped transistor. The shield, which shunts capacirively coupled mon noise to ground, provides a guaranteed transient immunity specification of 1000V / μs. TLP115A : Mini Flat Package, 5Pin, one circuit. - Input current thresholds: IF = 5m A (max) - Switching speed: 10MBd (typ.) - mon mode transient immunity: ± 1000V / μs (min) - Guaranteed performance over temp. : 0 to 70°C - Isolation voltage: 2500Vrms (min) - UL-recognized: UL 1577, File No.E67349 - c UL-recognized: CSA ponent Acceptance Service No.5A File No.E67349 Schematic 1 VF 3 Shield ICC VCC 6 IO VO 5 GND 4 TOSHIBA 11- 4C2 Weight: 0.09 g (typ.) Pin Configuration (top view) VCC 6 1 : Anode 3 : Cathode 4 : GND 5 : VO(Open Collector Output) 6 : VCC Truth Table (positive logic) Input H L Output L H Note. A 0.1μF bypass capacitor must be connected between pins 4 and 6. ©...