Datasheet4U Logo Datasheet4U.com

TLP265J - Photocoupler

Features

  • (1) Peak off-state voltage: 600 V (min) (2) Non zero crossing functionary (NZC) (3) Trigger LED current: 10 mA (max) (4) On-state current: 70 mA (max) (5) Isolation voltage: 3750 Vrms (min) (6) Safety standards UL-recognized: UL 1577, File No. E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No. E67349 VDE-approved: EN 60747-5-5, EN 62368-1 (Note 1) CQC-approved: GB4943.1, GB8898 Japan and Thailand Factory Note 1: When a VDE approved type is needed, please designate the Option (.

📥 Download Datasheet

Datasheet preview – TLP265J

📁 Similar Datasheet

  • TLP261J - Photocoupler (Toshiba)
  • TLP2662 - Photocoupler (Toshiba)
  • TLP2662F - Photocoupler (Toshiba)
  • TLP200G - TRIPOLAR OVERVOLTAGE PROTECTION (STMicroelectronics)
  • TLP200G-1 - TRIPOLAR OVERVOLTAGE PROTECTION (STMicroelectronics)
  • TLP200M - TRIPOLAR OVERVOLTAGE PROTECTION (STMicroelectronics)
  • TLP206GA - Photocoupler Photorelay (Toshiba)
  • TLP2105 - Photocoupler (Toshiba)
  • TLP2108 - Photocoupler (Toshiba)
  • TLP2110 - Photocoupler (Toshiba)
Other Datasheets by Toshiba Semiconductor

Full PDF Text Transcription

Click to expand full text
Photocouplers Infrared LED & Photo Triac TLP265J TLP265J 1. Applications • Triac Drivers • Programmable Logic Controllers (PLCs) • AC-Output Modules • Solid-State Relays 2. General The TLP265J consists of a non zero crossing photo triac, optically coupled to an infrared LED. The TLP265J is housed in the SO6 package and guarantees a creepage distance of 5.0 mm (min), a clearance of 5.0 mm (min) and insulation thickness of 0.4 mm (min). Therefore, the TLP265J meets the reinforced insulation class requirements of international safety standards. 3.
Published: |