TLRMHGH48F Datasheet | Toshiba

TLRMHGH48M(F) TOSHIBA LED LAMP In Ga Al P RED/GREEN LIGHT EMISSION TLRMHGH48M(F) ○ BI-COLOR HIGH LUMINOSITY INDICATOR Includes protruded resin. Unit: mm - - - - - - Lead(Pb) free(Sn-Ag-Cu) High Luminous Intensity. 5mm package In Ga Al P Red/Green LED, the cathode is mon to two colors. All plastic mold type. Milky white, diffusion lens. Absolute Maximum Ratings (Ta = 25°C) CHARACTERISTICS FORWARD CURRENT REVERSE VOLTAGE POWER DISSIPATION OPERATING TEMPERATURE SYMBOL IF VR Topr Tstg RATING 50 (Note) 4 - 40~100 - 40~120 UNIT m A V °C °C Stopper Anode(Red) Note: Using continuously under heavy loads (e.g. the application of high mon Cathode temperature/current/voltage and the significant change in Anode(Green) temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. JEDEC ― Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling JEITA ― Precautions”/“Derating Concept and Methods”) and individual TOSHIBA 4-5AR1 reliability data (i.e. reliability test report and estimated failure rate, etc). Weight: 0.37 g (typ.) Note1:Maximum rating of “forward current - atmospheric temperature (i.e. IF-Ta graph in the next page)” is for each ponent. In case two ponents lightening, total current should be within the rating. PRECAUTIONS Please be careful of the followings - Soldering temperature : 260 max Soldering time :3 s max (Soldering portion of lead : below the lead stopper of the device ) - If the lead is formed, the lead should be formed up to below the lead stopper of the device without Formed stress to the resin. Soldering should be performed after lead forming. - The visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp, please ensure that it will not be affected by the IR light. ELECTRICAL AND OPTICAL CHARACTERISTICS...