TLYU114P Datasheet | Toshiba

TLOU114P,TLSU114P,TLYU114P TENTATIVE TOSHIBA In Ga AℓP LED TLOU114P,TLSU114P,TLYU114P Panel Circuit Indicator - - - - - - - - In Ga AℓP LED Without stand- offs All plastic mold type Colored lusterless lens Lineup: 3 colors (red, orange, yellow) Suitable for high- brightness and less electricity consumption. All plastic molded lens, provides an excellent on- off contrast ratio. Applications: Backlight, light for decoration, switches, various indicator, personal equipment Unit in mm Lineup Product TLOU114P TLSU114P TLYU114P Color Orange Red Yellow Material In Ga AℓP In Ga AℓP In Ga AℓP JEDEC EIAJ TOSHIBA Weight: 0.31g ― ― Maximum Ratings (Ta = 25°C) Product TLOU114P TLSU114P TLYU114P Forward Current IF (m A) 30 30 30 Reverse Voltage VR (V) 4 4 4 Power Dissipation PD (m W) 72 72 75 Operating Temperature Top (°C) -20~75 -20~75 -20~75 Storage Temperature Tstg (°C) -30~100 -30~100 -30~100 2002-09-25 TLOU114P,TLSU114P,TLYU114P Electrical And Optical characteristics (Ta = 25°C) Prodact λp TLOU114P TLSU114P TLYU114P Unit 612 636 590 nm Typ.Emission Wevelength ∆λ 15 17 13 IF 20 20 20 m A Min 47.6 47.6 47.6 mcd Luminous Intensity IV Typ. 250 250 130 Forward Voltage VF Max 2.4 2.4 2.5 V Reverse Current IR Max VR 50 50 50 µA 4 4 4 V IF 20 20 20 m A Typ. 2.0 2.0 2.1 IF 20 20 20 m A Precaution - - - Please be careful of the followings Soldering temperature: 260°C max Soldering time: 3s max (Soldering portion of lead: up to 2mm from the body of the device) If the lead is formed, the lead should be formed up to 5mm from the body of the device without forming stress to the resin. Soldering should be performed after lead forming. This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp,please ensure that it will not be affected by this IR light. 2002-09-25 TLOU114P,TLSU114P,TLYU114P TLOU114P - VF 100 Ta = 25°C 1000 500 Ta =...