LTD121EX1S-11 Datasheet | Toshiba

Global LCD Panel Exchange Center .panelook. One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! .panelook. Global LCD Panel Exchange Center .panelook. Specification No. G040110-I996 Revision History Date Rev Sheet Item Old New No (New) Sheet 1 Reason Toshiba Matsushita Display Technology Co.,Ltd Date:2004-09-13 Date: - - New No.NR-LTD121EX1S-11 Old No. m# Special m Addition m Change One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! .panelook. Global LCD Panel Exchange Center .panelook. Specification No. G040110-I996 Sheet 2 Caution and Handling Precaution For your end user's safety, it is strongly advised that the items with"¼"should be included in the instruction manual of the system which may be issued by your organization. For Safety Warning (1) Toshiba Matsushita Display Technology's Standard LCD modules have not been customized for operation in extreme environments or for use in applications where performance failures could be life-threatening or otherwise catastrophic. Since they must never be installed in aircraft navigation control systems (such as, but not limited to Traffic Collision System and Air traffic Indicator), in military defense or weapons systems, in critical industrial process-control systems (e.g., those involved in the production of nuclear energy), or in critical medical device or patient life-support systems. (2) DISCONNECT POWER SUPPLY before handling LCD module. DO NOT TOUCH the parts inside LCD module and the fluorescent lamp's (hereinafter called "FL") connector or cable in order to prevent electric shock, because high voltage is supplied to these parts from the inverter unit while power supply is turned on. (3) Make sure to insert the module FL connector to the inverter connector in correct position. Do not insert in irregular position. If incorrect, this may cause smoke or burn of electrical...